Conduit Bending Calculator
Offset travel, run, and multiplier for common bend angles.
Result
Offset multiplier
2.000 x
Run along the shrink axis
10.39 in
Shrink to allow for
1.61 in
Travel between marks
12.00 in
Degrees in this offset
60 deg
Degrees left before the 360 limit
300 deg
3-point saddle center bend
60 deg
3-point saddle center mark
12.00 in
Formula
Calculation logicWhat to check
- Offset depth
- Bend angle
Keep going
Related calculators and guides
Related calculators
Calculator
Cable Pulling Tension Estimator
Straight-run pulling tension and sidewall pressure screening.
- Straight-run tension
- Sidewall pressure at the bend
- Within the sidewall limit (1 = yes)
Calculator
Conduit Fill Calculator
Check raceway fill percent against NEC Chapter 9 limits.
- Raceway fill
- Allowed fill for this raceway
- Most conductors of this size
Calculator
Electrical Box Fill Calculator
NEC 314.16 box fill from conductor count, devices, and box volume.
- Required box volume
- Box volume available
- Margin (negative = undersized)
Related guides
Guide
Home Battery Sizing Guide
How much battery your home needs: usable kWh, modules, and DoD rules.
Read guideGuide
Battery Backup Runtime Guide
How long a battery lasts in an outage: loads, efficiency, and runtime math.
Read guideGuide
Home Battery Cost and Payback Guide
Installed cost, $/kWh math, incentives, and payback screening.
Read guideSaved calculations
Keep the assumptions with the result.
Save this calculation to return to the inputs, result, and report anytime.
Sign in or create an account to save this calculation.